20x4.00 TYRE+TUBE

• For fat bike, drift trike, Huffy slider
• 1x Tyre+Tube included

This chain guard will fit on 5.5hp/6.5hp/9hp Honda GX statonary engines, for go kart/trift trike/project.

This axle will fit our 125cc Sahara and Sahara Pro buggy.

This axle will fit our 90cc Sahara and Sahara Pro buggy. length 860mm, 20mm bearing

Diameter of mount hole is 8mm. Fit most 90cc buggies as

front/rear shocks. 225mm

Suspension arm----1 Lower arm

You will receive 1 arm.

AT 18X7.00-8, 8 inch 4 stud wheel. 

The diameter of the central hole is 90mm.

The distance of the opposite holes is 110mm

The distance of 2 next holes is 78mm.

This wheel fit our mini willy jeep

8 inch wheel 18x7-8 with 20 splines /20mm hole . It fit our FORZA 3 buggy as a rear wheel.

8 inch wheel 18x7-8 with 20mm bearing hole . It fit our FORZA 3 buggy as a front wheel

8 inch wheel 19x7-8 4 stud. It fits our 125cc SAHARA PRO as a front wheel

This gear shift cable will fit many chinese 250cc quad/atv/buggy/go kart. the length is around 1450mm.

#530H 52 links chain will fit our FORZA 5/FORZA 7/K5/K7 BUGGIES. length: around 41CM

This part will fit our FORZA 1,3,5,7 BUGGIES

Suspension lower arm

You will receive 1 arm.

upper arm---for our 200cc 300cc buggies.

You will receive 1 arm.

This set will fit on our 200cc buggy  forza 5/k5

Brand New 12V ignition coil lead fits most Chinese 4-stroke bikes/quad/ATV/buggy/trike. It fits our 200cc/300cc buggies.  You will receive one coil. 

This set will fit on our 300cc buggy  forza 7/k7

Ignition Coil 43cc 47cc 49cc Mini PIT Pocket Quad Dirt Bike ATV

Brand New 49cc pull start+carby+clutch for 49cc quad or dirt bike/scooter. 

You will receive 1x easy pull start, 1xclutch, 1xcarby.

Travel distance: around 120mm.

200cc 200X Challenger UTV new model

10 Inch 2.5-10tube for dirt bike

#T8F 110links chain will fit most dirt bike/quad/atv/buggy. length: around 44cm.

The size of this tyre+tube is 3.00-10 (80/100-10). Off road tread, you will receive 1xtyre and 1 tube.

NOTES:  All 4-stroke engines do not come with engine oil. The reason is that shipping companies do not allow oil inside. Before starting the engine, please ensure sufficient engine oil has been added.You can use motor bike oil SAE 10W-30,10W-40, 15W-30, 15W-40.

2 x F7TC Spark Plugs will fit most GX110/120/140/160/200/270 OR 2.5HP/5.5HP/6.5HP/7.5HP/9HP LIFAN HONDA ENGINES.

You will receive 2 spark plugs.

2 xNGK D8TC Spark Plugs will fit most 200/250cc chinese bike/quad/buggy/atv/trike. More sparking and easy to start engine.

You will receive 2 spark plugs.

2 x A7TC Spark Plugs will fit most 50-160cc chinese bike/quad/buggy/atv/trike.

You will receive 2 spark plugs.

• Mount hole distance (eye - eye): 250mm

• Overall dimensions:  850mm x 440mm x 350mm

• Stub axle thickness: 15mm

• Suspension (eye - eye): 280mm

• • Brake caliper mount hole distance: 50mm

It will fit our 9hp go kart.

Brand New 48T Teeth Rear Sprocket Cog Fit 428 Chain PIT TRAIL DIRT BIKE MOTORCROSS

41T Teeth 428 Chain Rear Back Sprocket Cog PIT TRAIL DIRT BIKE ATV KART BUGGY

This shock comes with a spring of 6mm thickness, and a mounting hole of 10mm.

Length: center to center 285mm.

It is used on our 9hp kart as a front shock.

You will receive 1x shock for this listing.

This oil dipstick will fit our 6.5hp/9hp karts/drift trikes/buggies. It comes with a rubber sealing ring

Brand New Oil Lever Dip Stick Dipstick for PIT Quad Dirt Bike ATV Dune Buggy

This shock comes with a spring of 8mm thickness, and a mounting hole of 10mm.

Length: center to center 310mm.

It is used on our 125cc 3+1 quad as a front shock.

You will receive 1x shock for this listing.

Brand New Gearbox

This set is used on our 9hp go-kart/drift trike.

These replacement clutch boxes come as complete units and are ready to be fitted to your engine.

Fits the Honda GX240 - GX390 range and most Chinese 9hp to 13hp clone engines with 25mm diameter and 60mm long output shafts, also known as the L-type PTO shaft option.

Requires a 60mm long, 25mm diameter crankshaft input, output is to a 22mm shaft, also known as the R-type PTO shaft.

Ready to assemble, they give incredible torque at lower engine speeds and are ideal replacements on go-karts, mixers, pumps, etc.

This is a carefully selected replacement part of the highest quality, and also at an affordable price too.

DETAILS:

• Type: 2:1 Reduction
• Input Shaft: 25mm Diameter, 60mm Long
• Input Shaft Keyway: 7mm
• Input Mounting Holes: 90mm Square

• Output Shaft: 22mm Diameter, 50mm Long
• Output Shaft Keyway: 7mm
• Output Mounting Holes: 70mm Square

Please Note: The gearbox is supplied without oil, and requires oil before use. This is typically the same as you would use in the engine sump i.e an SAE30 4-stroke small engine oil.

49cc go kart Front Stub Axle Strut Rod Knuckle Support Left/Right

Brand New 110cc engine SEMI with e/start and kick start, the starter motor is on the top.

 It will fit most Chinese 110cc dirt bikes/quads /buggies/karts

 Engine Size       107CC
 Gear System       4 gears, Semi-auto, 1-N-2-3-4 CIRCLE
 Type                     Horizontal, single-cylinder, 4-stroke, air-cooled
 Start Method        Electrical Start and Kick Start
 Bore x Stroke         52.5mm x 49.5mm
 Compression ratio      9.0:1
 Front sprocket      #420

We have all the accessories for this engine in stock, like the wiring harness, carby, air filter,  electrical parts(CDI unit, coil, kill switch), exhaust pipe & muffler. Please view our listings or contact us for more details.

BRAND NEW

SPROCKET DISC CARRIER HUB 20MM AXLE. It fits on our 80cc ESKY.

Fit Most project, Go Kart, HuFFy Slider, Drift Trike.

BRAND NEW

25mm Axle Assembly  Length 845mm

It fits our mini Willy Jeep with a back engine.

Fit Most

JEEP, Project, Go Kart, HuFFy Slider, Drift Trike.

This listing is for 1x shock.

This Shock fits on our mini Willy Jeep as the front shock.

Eye to Eye center: 290mm

Bolt hole: 10mm

Spring diameter:8mm

This listing is for 1x shock.

This Shock fits on our mini Willy Jeep as the rear shock.

Eye to Eye center: 270mm

Bolt hole: 10mm

Spring diameter:8mm

This tail light assembly fits on our mini Willy Jeep. 1x light assembly

#T8F 86 links chain will fit most dirt bike/quad/atv/buggy. length: around 345mm.

Brand New Recoil Pull Starter Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket. 4 Bolts Fixed.

It will fit our 49cc karts

 GO KART WHEEL BRAND NEW IN BLACK

Size: 10x4.50-5

3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.

Distance from bolt hole to next bolt hole: 50mm

Diameter of central hole for axle: 40mm

GO KART WHEEL BRAND NEW IN BLACK

Size: 11x7.10-5

3 STUD RIM&TYRE, WILL FIT MOST GO KART/HUFFY SLIDER/DRIFT TRIKE/BUGGY/PROJECT.

Distance from bolt hole to next bolt hole: 50mm

Diameter of central hole for axle: 40mm

This chain guard will fit on our 6.5hp drift trike/project.

Specification Of Carby
Diameter Of Intake Around 13mm
Distance Between Mount Holes(center Hole To Centre Hole) Around 38mm
Specification Of Air Filter
Inner Diameter Of Air Filter Connector Around 42mm
Length Of The Air Filter Around 50mm
Distance Between Adaptor Mounting Holes (center To Centre) Around 40mm

Features:
1. Easy to install, practical, easy to open cleaning filter net;
2. Made of aluminum alloy connector and glass housing; you can see filter inner clearly;
3. Thread design, you can dismount it repeatedly to clean and wash;
4. Aluminum alloy CNC connector, it has been polished and chrome plated;

Specifications:
Product name: 6mm CNC Universal Gas Fuel Oil Filter for Motocross ATV
Material: aluminum alloy+ glass
Color: Black/golden/green
Product size: 95 X 28 X 28mm/3.74 X 1.10 X 1.10"
Gross weight: about 50g
Nozzle size:6mm/0.31"
Applicable vehicle: motorcycle, car, ATV

1 X Gas Fuel Oil Filter

BIGFOOT 125CC PIT MOTOR DIRT BIKE TRAIL MOTOCROSS TERRAIN PRO KICK START GREEN

Features:

Big wheel 14/17 inches. USD forks Heavy duty rear shock absorb. Chrome performance exhaust. Knobby tires Hydraulic disc brakes. the latest model. Dress-up parts.

BRAND NEW HANGER

Fit Most

The project, Go Kart, HuFFy Slider, Drift Trike.

Feature:

• E-starter and pull-starter
• TAV30 Series Torque converter
• Rear vision mirrors
• Front and rear hydraulic brakes
• Horn
• Chain guard
• Headlight(high and low beams)
• Tail light
• Suspensions
• Heavy duty #530 chain

Feature:

• E-starter and pull-starter
• TAV30 Series Torque converter
• Rear vision mirrors
• Front and rear hydraulic brakes
• Horn
• Chain guard
• Headlight(high and low beams)
• Tail light
• Suspensions
• Heavy duty #530 chain

Feature:

• E-starter and pull-starter
• TAV30 Series Torque converter
• Rear vision mirrors
• Front and rear hydraulic brakes
• Horn
• Chain guard
• Headlight(high and low beams)
• Tail light
• Suspensions
• Heavy duty #530 chain

Silver 700mm 22mm Steel Handle Bar 70cc 110cc 125cc PIT PRO Quad Dirt Bike ATV

Brand New Steel Handle Bars For PIT PRO PIT Bike Trail Bike Dirt Bike Thumpstar

Size:
Intake Diameter:15mm

Distance between mount holes (centre to centre ): 31mm
 
Fitment:

This wheel as a front wheel fits our kid's buggy FORZA1/K1

Size: 6 inch

Model: 145/70-6

Axle hole: 15mm

This wheel as a rear wheel fits our kid's buggy FORZA1/K1

Size: 8 inch

Model: 16x6-8

Axle hole: 20mm